CAPABILITY
For 1 Layer Printed Circuit Board
1 | Material thickness | 0.4-1.6mm | |
2 | Copper thickness | 35µ (1oz) | 70µ (2oz) |
3 | Minimum line width | 0.17mm | 0.17mm |
4 | Minimum line spacing | 0.17mm | 0.17mm |
5 | Smallest punched hole size | Paper: 0.7mm | Glass fabric: 0.8mm |
6 | Hole size tolerance | 0.05mm | |
7 | Min. height + width of legend | 1.3mm | 0.3mm |
8 | Spacing between PCB | V-cut : | 0.3mm |
Push back: | 4.0mm | ||
Break apart: | 1.0mm | ||
9 | Max punching surface | 300mm x 500mm | |
10 | Max hole quantity for tooling | Paper: 3000 holes | CEM: 2000 holes |
11 | Tooling lead time | 1-2 weeks | |
12 | Electrical test | No. of Max. test point: | 4096 |
13 | Special surface treatment | Golden plating: | 0.5-1 µm |
Carbon conductive ink: | As per customer request | ||
OSP | Water Solution Flux | ||
HASL | Lead free | ||
Tin plating | As per customer request |